High & Variable Speed, High Precision Lathe, Heavy Lathe Machine, Heavy lathe, Lathe Tool, Universal Milling Machine, Precision Lathe, Lathe tool from India


HIGH & VARIABLE SPEED, HIGH PRECISION LATHE
(MODEL: 1350/1650)

High & Variable Speed, High Precision Lathe, Heavy Lathe Machine, Heavy lathe, Lathe Tool, Universal Milling Machine, Precision Lathe, Lathe tool from India

FEATURES | | STANDARD & OPTIONAL ACCESSORIES | TECHNICAL SPECIFICATIONS IN MM


FEATURES
 
  • Flame hardened Bedways.
  • Hardened & Profile Ground Headstock Gears
  • Hardened & Ground Alloy Steel Spindle is mounted on Taper Roller Bearings at the front & one Roller Bearings at rear end.
  • A drop-out type worm box with finger tip control is used to engage feed for surfacing & sliding
  • Meticulous care is taken in selecting the right raw material for every component. Each & every component is passed through strict quality control & the machine is put to rigorous tests confirming to IS : 1878 (Part I) 1971 before dispatch from our ultra modern plant having sophisticated mother machinery.


Standard Accessories
Optional Accesories
 
Electricals, Inch & MM Gears, Oil Can, Spanner & Allen Key Set & Instruction manual. Face Plate, Steady rest, Follow Rest, Machine lamp, Elec. Coolant pump with tank fittings, Taper turning attachment, Quick change tool post with 5 tool holders. chuck plate, self centering 3 jaw chuck revolving centre.
 

Place an Enquiry here or send an email to info@gujaratlathe.com

 

TECHNICAL SPECIFICATIONS IN MM
 
MODEL 1350/1 1350/2 1650/1 1650/2
Heightfor centres 177mm 177mm 215mm 215mm
Swingover bed 335mm 335mm 410mm 410mm
Swingover cross slide 205mm 205mm 255mm 255mm
Dist.between centres 540 540 1000 1500
Movementof cross slide 260mm 260mm 300mm 300mm
BED
Bedtype 2Flat & 2V 2Flat & 2V 2Flat & 2V 2Flat & 2V
Bedwidth 230mm 230mm 230mm 230mm
MAINSPINDLE
Type& size of spindle nose Threaded 66 x 6 TPI Threaded 66 x 6 TPI Threaded 66 x 6 TPI Threaded 66 x 6 TPI
Taperbore in centre sleeve MT- 4 MT- 4 MT- 4 MT- 4
Spindlebore 42mm 42mm 42mm 42mm
TAILSTOCK
Spindlediameter 45mm 45mm 45mm 45mm
Taperbore in spindle sleeve MT- 4 MT- 4 MT- 4 MT- 4
TOPSLIDE
Travelof top slide 140 140 140 140
Toolshank section 16x 16 16x 16 16x 16 16x 16
SPEEDS
No.of speeds 8/16 8/16 8/16 8/16
RangeRPM 45-938/30-1250 45-938/30-1250 45-938/30-1250 45-938/30-1250
FEEDS
No.of feeds 36 36 36 36
Range
Longitudinalfeeds per Revolution 0.05to 0.8mm/Rev 0.05to 0.8mm/Rev 0.05to 0.8mm/Rev 0.05to 0.8mm/Rev
TransverseFeeds per Revolution 0.03to 0.48mm/Rev 0.03to 0.48mm/Rev 0.03to 0.48mm/Rev 0.03to 0.48mm/Rev
THREADSNO. RANGE
Inch 36/4to 60 TPI 36/4to 60 TPI 36/4to 60 TPI 36/4to 60 TPI
Metric 38/0.2to 6mm 38/0.2to 6mm 38/0.2to 6mm 38/0.2to 6mm
ELECTRICALS
Mainmotor 2HP 2HP 2HP 2HP
Powersupply 3Phase 3Phase 3Phase 3Phase
OTHERDATA
Grossweight 1000 1100 1400 1550
FLOORSPACE
Occupied(L x W) 1850x 940 2240x 940 2150x 1100 2650x 1100
PACKINGDIMENSION 1860x 1000 x 1250 2240x 1000 x 1250 2300x 1000 x 1250 2850x 1000 x 1250


Place an Enquiry here or send an email to info@gujaratlathe.com